Project Description

COMPACT PRESSURIZED SOLAR HEAT PIPE SYSTEM

A budget option for the low cost application that does not cut corners.

WORKING PRINCIPLE

The vacuum tube collects heat from sunshine, the aluminium ring inside transfers the heat to heat pipe, then heat pipe transfers the heat to the water inside the tank. The system starts and transfer of heat is efficient on cloudy and low radiation days. Daily average heat efficiency can go up to 55%.

Features

  1. High thermal performance: The heat exchanging rate even in winter can go above 55%.
  2. Efficiency: Heat collecting efficiency is at least 20% above common solar systems.
  3. Works with all Seasons: This system is designed to work perfectly and insulated to withstand temperatures of up to -40°C to avoid the tubes freezing.
  4. Reliability: Water does not flow through the tube and water scale cannot be formed. Thus, tube cracks can be avoided and the system will work even with some damaged tubes.
  5. Working Pressure: Designed to handle pressure of up to 0.6Mpa.
  6. Safety: P/T valve would release pressure and temperature to protect tank.

Technical Specifications

  1. Outer tank material: SUS304 stainless steel or powder coated colour steel
  2. Inner tank material: 1.2mm thick SUS304 food grade stainless steel (Optional material SUS316L)
  3. Vacuum tube material: Borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
  4. Frame material: 1.2mm thickness stainless steel
  5. Insulation material: 55mm thickness polyurethane
  6. Compatible with high Pressure: Suitable for mains pressure water (up to 8 bar/116psi)
  7. Seal material: Stabilized High Temperature Silicon
  8. Easy plug-in installation
  9. Note: Install the T/P valve on the pressurized tank

FREE SURVEY & QUOTE

Do you need a hot water solution? Fill out this form to get in touch.

OFFICE LINE

1.800.555.6789

EMERGENCY

1.800.555.0000

WORKING HOURS

9:00am – 6:00pm

OFFICE LINE

1.800.555.6789

EMERGENCY

1.800.555.0000

WORKING HOURS

9:00am – 6:00pm